Thursday , March 22 2018
Home / Rmadan / Types of Jewellery Mounting Techniques

Types of Jewellery Mounting Techniques

Stones and gems are often an essential element in a jewellery piece. They can add more charm, appeal and shimmer to the design of these precious pieces. However, these stones are not merely glued on a piece of jewellery, jewellers use appropriate techniques and ways of mounting called Jewellery Setting. Here are some jewellery setting techniques often used in mounting precious or semi precious stones to jewellery.

The Prong Setting is primarily used in mounting diamonds, pearls and gemstones. It consists of four to six vertical posts poked up from the base beneath the stone. These posts create a seat on which the stone will sits. The prongs or spikes are then folded over, onto the stone to embrace and hold it in place. This setting provides an modest and sleek appearance.

In order to mount flat-backed stones like cameos or cabochons, the Bezel Setting is employed by jewellers. This jewellery setting features a thin rim of precious metal which can be of either a decorative or simple designs, encircles the stone entirely or partially. The rim is then bent a little inward towards the stone to adhere it in place. A diamond mounted by bezel setting looks more elegant and is cosseted from accidental rubbing. This setting is more secure so the precious gem is unlikely to be dislodged.

The Channel Setting is described as a trough or a channel in the metal. This jewellery setting is akin to the bezel setting with no sides nor prongs. Notches are present on both sides of the channels on which the stones are mounted. This levels the stone atop the channel and sets the stones in a solid line.

The Channel Setting also has its variation called the Bar Setting. This mounting kind provides a look where a number of stones are seemingly floating in adjacent berths as every gem is docked in its respective private channel and separated from its neighboring stones by two pieces of thin bars of metal.

The Pave Setting is utilized in jewellery making to create a surface which seems being filled with small round stones, usually diamonds. Every piece of the gems lie in the drilled hole in the base of the setting. The stones are then fastened by small bead of metal pressed up against the stones. It creates an appearance of a stones blanket since each stone is slightly set apart by the width of the small beads.

The Bead Setting is a type of jewellery mounting that sets the stone into the metals through the use of gravers or burins (tiny chisels). The metal surface is directly drilled with a hole, then a ball burr is utilized to create a concave hollow with the same size as that of the stone.

Flush Setting is a variation of the Bezel Setting and is sometimes called the Gypsy Setting that appears similar with the bead setting. This is a recent type of setting that creates a fashionable appearance. Sandblasting is utilized to finish the mounting process. In this type of jewellery mounting, a window is cut from the base where the gem is set and secured underneath, the top or the crown may reach over the base which allows the gem to twinkle with light.

Source by W Tsang

Check Also

Plus Size Fur Jackets and Fur Coats – Sexy Looks for Larger Ladies

In a world where fashion magazines are full of anorexic fashion models that look like …

Leave a Reply

Your email address will not be published. Required fields are marked *